Operating Manual for Repeat48 / Repeat48WDM Digital Video Network device © Copyright 2017 All rights reserved BROAMAN GmbH Lohenstr. 8 82166 Munich-Gräfelfing Germany BROAMAN Repeat48/Repeat48WDM Operating Manual Rev. 2.
Page intentionally left blank.
Important Safety Instructions • Please read this operating manual carefully. • Please keep this operating manual in a safe place. • Heed all warnings. • Follow all instructions. • This device may only be used in accordance to the information provided in this operating manual. Ensure that all recommendations, especially the safety recommendations as detailed in this operating manual, are followed before and during the usage of the device.
Owner Information • Operating Manual Please read this manual. If you call for technical support, we will assume that you have already done so. Study the operating manual carefully in order to familiarise yourself with the device and its operation. The operating manual contains important information on proper use of the device. It cannot be guaranteed that this operating manual will not contain typographical mistakes or misprints. The operating manual is regularly revised and updated.
• Cleaning Only use a dry linen cloth to clean the device. If the unit is very dirty, moisten a cloth using a little water and a small amount of household detergent. Never use cleansing agents containing solvents to clean the device.
• External objects and/or liquids with the device Never push objects of any kind into the device through openings in the casing. They may come into contact with dangerous voltage points or short out parts that could result in fire or electric shock. Never spill liquid of any kind on the device. • Cables and Accessories Only use attachments that are specified by the manufacturer of the device. Use high quality, properly terminated, cables to connect the device.
CE/FCC-ConformityThis document confirms that the product Repeat48 bearing the CE (Communauté Européenne) label meets all requirements in the EMC directive 2004/108/EG laid down by the Member States Council for adjustment of legal requirements. Furthermore the product complies with the rules and regulations of the low-voltage directive 2006/95/EG and the Restriction of Hazardous Substances Recast Directive 2011/65/EU (RoHS 2).
Page intentionally left blank.
Repeat48/Repeat48WDM – Digital Video Network repeater Table of Contents Important Safety Instructions..................................................................................................................................... 3 Owner Information ..................................................................................................................................................... 4 Device Description ..............................................................................
Device Description Congratulations on your purchase of a Repeat48/Repeat48WDM - SD/HD/3G-SDI and AES10/MADI electricaloptical-electrical converter. The Repeat48/Repeat48WDM manual, accompanied with the device’s configuration sheet and DiViNe system manual, will quickly demonstrate the advantages of the device and help ease your day to day workload in the broadcast and professional audio visual industry.
Front Panel Repeat48 and Repeat48WDM Input status LED: Signal indicator for channels 1-24: LED ON: Signal is present LED OFF: No signal is present PWR 1 LED: PWR 2 LED: Green: Power supply 1 is operational and receiving power Green: Power supply 2 is operational and receiving power Repeat48/Repeat48WDM 11 / 21 rev. 2.
Rear Panel Repeat48 Coax to fibre ports 1-24: Populated with up to 12 Dual channel electrical-optical-electrical 3G/HD/SD-SDI or AES10/MADI modules. Each port can be configured by the manufacturer as: • Input • Output POWER 1 and 2: AC input for power supply 1 and 2 (100 … 240 V) Optionally: DC input for power supply 1 and 2 with 4 pin XLR Male (8 …18V) Repeat48WDM Fibre ports 1-16: Up to 16 simplex LC fibre connections to internal WDM, CWDM or DWDM modules.
Device Details BNC Ports Each pair of the twenty-four I/O ports can be equipped with a high quality BNC connectors, providing 3G/HD/SDSDI or AES10/MADI connectivity.
Connectors and Cables 3G/HD/SD-SDI and MADI Ports Use 75 Ω coaxial cable with BNC connectors. Cables and connectors used should comply with SD/HD/3G-SDI and/or AES10/MADI interconnection standards. The maximum cable length is dependent on the bandwidth of the signal (AES10/MADI, SD, HD or 3G), the specification of the cable and connectors. Please consult the device’s configuration sheet for configuration of inputs and outputs.
Ordering Options Below tables list the configurations available as a standard devices with unique ordering code. Please refer to the specific code when ordering. BroaMan offers also custom versions of Repeat48/Repeat48WDM with different I/O number, more fiber AUX channels and special connectivity. To specify custom device please contact inquiry@broaman.com.
Repeat48WDM-12 Code R48W12002PA2 Description Repeat48WDM-12 R48W10022PA2 12 x 3G-SDI IN, 1 x 1310nm AUX, 1 x Optocore Tunnel, 1 x COM, 2 x PSU Repeat48WDM-12 R48W08042PA2 10 x 3G-SDI IN, 2 x 3G-SDI OUT, 1 x 1310nm AUX, 1 x Optocore Tunnel, 1 x COM, 2 x PSU Repeat48WDM-12 R48W06062PA2 8 x 3G-SDI IN, 4 x 3G-SDI OUT, 1 x 1310nm AUX, 1 x Optocore Tunnel, 1 x COM, 2 x PSU Repeat48WDM-12 R48W04082PA2 6 x 3G-SDI IN, 6 x 3G-SDI OUT, 1 x 1310nm AUX, 1 x Optocore Tunnel, 1 x COM, 2 x PSU Repeat48WDM-12 R48W
Connection Example This example shows the connection between two standalone Repeat48-12 units and one Repeat48-24. The center Repeat48-24 is configured with 6 dual 3G-SDI input modules (12 channels) and 6 dual 3G-SDI output modules. The top device is configured with 6 dual 3G-SDI input modules and the bottom device is configured with 6 dual 3G-SDI output. Each device is connected with six dual-core single mode fibre cables to the central unit. Fig.
Technical Specifications Video Standards Complies with SMPTE Interface SD, ED, HD, Dual Link, 3G 259M, 292M, 344M, 372M, 424M SDI – Serial Digital Interface Optical Connection Complies with 21 CFR 1040.10 and 1040.
Warranty and Liability Summary of Warranty Broaman Repeat48/Repeat48WDM device is warranted against defects in material and workmanship for 60 months (5 years) from the date of purchase. This warranty does not include mechanical damages caused by misuse. This warranty covers the original registered purchaser only and is not transferable. This warranty does not apply to devices which have been purchased in used condition or demonstrator equipment.
Package Contents Repeat48/Repeat48WDM is a part of the ordered system. Each Repeat48 (or Repeat48WDM) package consists of: • 1 Repeat48 (or Repeat48WDM) unit • 2 power cables Any additionally purchased equipment such as optical fibre cables in required lengths, D-Sub cables and adapters, RS232 cables, and international electric cables which have been supplied on your request and your purchase order, cannot be listed above.
Contact Information Mailing Address: BROAMAN GmbH Lohenstr. 8 D-82166 Munich-Gräfelfing Germany Telephone: +49 – (0)89 – 89996460 Facsimile: +49 – (0)89 – 89996455 Internet: www.BroaMan.com Email: inquiry@broadcastmanufactur.com Repeat48/Repeat48WDM 21 / 21 rev. 2.
