Manual

BroaMan MUX22
Operating Manual
Rev. 2.1
25
SANE 1: SANE RJ-45 interface for audio transmission and 100 Mbit Ethernet
SANE 2: SANE RJ-45 interface for audio transmission and 100 Mbit Ethernet
LINK 1: Full-duplex, full bandwidth LC-type optical interface for Optocore transmission
(SFP transceiver – type depending on a specyfication)
LINK 2: Full-duplex, full bandwidth LC-type optical interface for Optocore transmission
(SFP transceiver – type depending on a specyfication)
LAN 1: 100 Mbit RJ-45 Ethernet interface
LAN 2: 100 Mbit RJ-45 Ethernet interface
MUX22 with RS422 special serial data interface
RS422: 4 x RS422 bi-directional (HD-Sub-26) auxiliary port for data transmission
WDM ports LINK1/2: CWDM or DWDM multiplexer Input/Output for Optocore duplex fiber
connection (LINK1 and LINK2). Can be used for external fiber devices such
as Ethernet switches (see AUX1/2).
SYNC In: Tri-/Bi-Level Sync or Word Clock (software selectable) input allowing
synchronisation of Optocore devices/network and sync signal distribution via
the Optocore network from an external Sync/Word Clock source
SYNC Out Tri-/Bi-Level Sync or Word Clock output for synchronization of external
devices
SANE 1: SANE RJ-45 interface for audio transmission and 100 Mbit Ethernet
SANE 2: SANE RJ-45 interface for audio transmission and 100 Mbit Ethernet
LINK 1: Full-duplex, full bandwidth LC-type optical interface for Optocore transmission
(SFP transceiver – type depending on a specyfication)
LINK 2: Full-duplex, full bandwidth LC-type optical interface for Optocore transmission
(SFP transceiver – type depending on a specyfication)
LAN 1: 100 Mbit RJ-45 Ethernet interface
LAN 2: 100 Mbit RJ-45 Ethernet interface
Special serial data RS422 interface is available on
request with all Mux22 versions.