Manual

BroaMan MUX22
Operating Manual
Rev. 2.1
18
MUX22 IVT/IVT
Word Clock LED: Indicates the selected Sync/Word Clock source:
INT: Internal Sync/Word Clock of the device
BNC: External via the BNC SYNC input
NET: Sync/Word Clock received from the Optocore network
Signal Monitor LED for 16 3G/HD/SDI Channels:
IVT: Intelligent Video Tunnel
MR: currently not used
R33: currently not used
VSP: currently not used
PEAK: Red: Optical power exceeds the maximum input level of the receiver
LEVEL: Yellow: Optical power is in proper range and good condition
SIGNAL: Green: Indicates optical input/output power by brightness
MUTE: Red: Optical power is too low, signal is muted
LINK LED:
SL1: Communication is established via SANE 1 (rear panel)
SL2: Communication is established via SANE 2 (rear panel)
OL1: Communication is established via Optocore LINK 1 (rear panel)
OL2: Communication is established via Optocore LINK 2 (rear panel)
Master LED: Indicates the master device in the system
OPTO LED: Optocore communication is established
SANE LED: SANE communication is established
Device ID Display: The identification number (ID) of the device
HEALTH LED: Green: Power supply to the device is working; temperature is within limits
PWR 1 LED: Green: Power supply 1 is receiving power and working
PWR 2 LED: Green: Power supply 2 is receiving power and working
USB connector: USB connection for remote control via PC
USB LED: Green: Indicates data activity
RS232 connector: RS232 (D-Sub-9) connection for remote control and firmware updates via PC
LAN LINK LED:
S1: Ethernet communication is established via SANE 1 (rear panel)