Manual

BroaMan MUX22
Operating Manual
Rev. 2.1
12
Front Panel
MUX22 IVT/IC444; IVT/IC422; IVT/IC485; IVT/ICAES
Word Clock LED: Indicates the selected Sync/Word Clock source:
INT: Internal Sync/Word Clock of the device
BNC: External via the BNC SYNC input
NET: Sync/Word Clock received from the Optocore network
Signal Monitor LED for 4 Duplex Audio Channels:
IC422: Four-wire intercom ports with bi-directional RS422 (for Clear-Com)
IC485: Four-wire intercom ports with bi-directional RS485 (for RTS)
IC444: Line Level I/O with GPIO
ICAES: Bi-directional AES3 ports
PEAK: Red: Clipping. Input level exceeds the maximum input level of 0dBFS
LEVEL: Yellow: Warning level. Input level exceeds -10dBFS
SIGNAL: Green: Signal present ≥ -60dBFS. Brightness controlled
MUTE: Red: Input: no function; Output: no signal routed to this output
Signal Monitor LED for 8 3G/HD/SDI Channels:
IVT: Intelligent Video Tunnel
MR: currently not used
R33: currently not used
VSP: currently not used
PEAK: Red: Optical power exceeds the maximum input level of the receiver
LEVEL: Yellow: Optical power is in proper range and good condition
SIGNAL: Green: Indicates SDI input/output signal presence
MUTE: Red: Optical power is too low, signal is muted
AUDIO LINK LED:
SL1: Communication is established via SANE 1 (rear panel)
SL2: Communication is established via SANE 2 (rear panel)
OL1: Communication is established via Optocore LINK 1 (rear panel)
OL2: Communication is established via Optocore LINK 2 (rear panel)
Master LED: Indicates the master device in the system
OPTO LED: Optocore communication is established
SANE LED: SANE communication is established
Device ID Display: The identification number (ID) of the device