Datasheet

Datasheet
Revision 2.1 / January 2017
BroaMan Mux22-IVT/IVT
3G/HD/SD-SDI video I/O unit with built-in CWDM module and data
BroaMan (Broadcast Manufactur), the German-based broadcast network specialist
provides scalable, protocol independent, routing, repeating, transport and distribution of
multiple professional video signals, such as 3G/HD/SD-SDI, over optical fiber.
Complete BroaMan systems are built from a collection of modules that include coaxial
and optical I/O, routers, repeaters, and optical multiplexers. Using the modular
BroaMan building blocks, any system configuration can be realised.
BroaMan systems are built around three main product series – Repeat48, MUX-22 and
Route66. Repeat48 series offers basic E-O-E conversion as well as fiber multiplexing.
The MUX-22 series is a flexible and small-sized redundant video, audio, data transport
and basic routing platform. Route66 enables customisable routing solutions as well as
E-O-E conversion and multiplexing.
The MUX-22 IVT/IVT can be used as a video and data (Ethernet, RS485/422 or GPIO)
device with 16 3G/HD/SD video ports configured with the required number of inputs and
outputs in group of two.
The Tri/Bi-level video clock input and output module can be installed in the device on
request. The output can be derived from any source in the system.
The MUX-22 seamlessly integrates into the OPTOCORE OPTICAL DIGITAL
NETWORK SYSTEM. Analogue or digital audio can be interfaced and sent
transparently through the optical network together with video, Ethernet and serial data.
Each audio and data channel can be routed to and from every device on the network
using the OPTOCORE CONTROL software. The software also enables the monitoring
of video signals displaying the status of each SFP built into the device.
The MUX-22 is equipped with a CWDM modules with auxiliary fiber ports to allow for
connection of external fiber systems, such as Optocore, to the CWDM module. All video
and data channels can be multiplexed onto a single fiber. MUX-22 is populated with SDI
I/O and multiplexers at the time of manufacturing, according to customer’s
specifications.
MUX-22 is equipped with a built-in redundant power supply with an automatic
switchover. All fiber links can be delivered as redundant with an automatic switchover in
case of fiber failure.
MUX-22 units can be used in multiple different applications, starting from a very simple
point-to-point links between OB truck and remote location. MUX-22 can also be used in
a redundant ring topology or with BroaMan Route66 units, as a part of large routing
solution.
Video, Audio,
Data interface
Product Features
!
3G/HD/SD-SDI capacity
-16 3G/HD/SD-SDI ports
!
3G/HD/SD-SDI modules
- Dual Input with adaptive EQ
- Dual Output
- Reclocker for each input or
output
- All modules with or without
redundancy
!
Built-In CWDM module
!
Fiber auxiliary ports for 3
rd
party devices and protocols
!
Full integration into SANE
and Optocore network
!
Optocore module with 2
LAN ports and 2 SANE/LAN
ports
!
RS485 or GPIO or RS422
optional ports
!
Tri/Bi-Level sync with Word
Clock
!
Redundant power supplies
!
Full control with Optocore
control software