Manual

BroaMan MUX22
Operating Manual
Rev. 2.1
13
HEALTH LED: Green: Power supply to the device is working; temperature is within limits
PWR 1 LED: Green: Power supply 1 is receiving power and working
PWR 2 LED: Green: Power supply 2 is receiving power and working
USB connector: USB connection for remote control via PC
USB LED: Green: Indicates data activity
RS232 connector: RS232 (D-Sub-9) connection for remote control and firmware updates via PC
LAN LINK LED:
S1: Ethernet communication is established via SANE 1 (rear panel)
S2: Ethernet communication is established via SANE 2 (rear panel)
UP: There is another device with an enabled Ethernet port on the network
L1: Ethernet communication is established via LAN 1 (rear panel)
L2: Ethernet communication is established via LAN 2 (rear panel)
Sample rate LED: Yellow: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz