Datasheet

Datasheet
Revision 2.1 / January 2017
BroaMan Mux22-IVT/IC422
3G/HD/SD-SDI video I/O unit with built-in CWDM module,
intercom I/O and data
BroaMan (Broadcast Manufactur), the German-based broadcast network specialist
provides scalable, protocol independent, routing, repeating, transport and distribution of
multiple professional video signals, such as 3G/HD/SD-SDI, over optical fiber.
Complete BroaMan systems are built from a collection of modules that include coaxial
and optical I/O, routers, repeaters, and optical multiplexers. Using the modular
BroaMan building blocks, any system configuration can be realised.
BroaMan systems are built around three main product series – Repeat48, Mux22 and
Route66. Repeat48 series offers basic E-O-E conversion as well as fiber multiplexing.
The Mux22 series is a flexible and small-sized redundant video, audio, data transport
and basic routing platform. Route66 enables customisable routing solutions as well as
E-O-E conversion and multiplexing.
The Mux22 can be used as a video and data (Ethernet, RS485/422 or GPIO) device
with 8 3G/HD/SD video ports configured with the required number of inputs and outputs
in group of two and an intercom (analogue audio and control data) for Clear-Com.
The Tri/Bi-level video clock input and output module installed in the device enables to
sync from external video reference sources and distribute it through out the network.
The Mux22 seamlessly integrates into the OPTOCORE OPTICAL DIGITAL NETWORK
SYSTEM. 4-wire intercom signals for Clear-Com are sent transparently through the
optical network together with video, Ethernet and serial data. Each audio and data
channel can be routed to and from every device on the network using the OPTOCORE
CONTROL software. The software also enables the monitoring of video signals
displaying the status of each SFP built into the device.
The Mux22 is equipped with a CWDM module with auxiliary fiber ports to allow for
connection of external fiber systems, such as Optocore, to the CWDM module. All
video, audio and data channels can be multiplexed onto a single duplex fiber. Mux22 is
populated with SDI I/O and multiplexers at the time of manufacturing, according to
customer’s specifications.
Mux22 is equipped with a built-in redundant power supply with an automatic switchover.
All fiber links can be delivered as redundant with an automatic switchover in case of
fiber failure.
Mux22 units can be used in multiple different applications, starting from a very simple
point-to-point links between OB truck and remote location. Mux22 can also be used in a
redundant ring topology or with BroaMan Route66 units, as a part of large routing
solution.
Video, Audio,
Data interface
Product Features
!
3G/HD/SD-SDI capacity
- 8 3G/HD/SD-SDI ports
!
3G/HD/SD-SDI modules
- Dual Input with adaptive EQ
- Dual Output
- Reclocker for each input or
output
- All modules with or without
redundancy
!
Intercom module
- 4 four wire ports for Clear-
Com intercom(IC422)
!
Built-In CWDM module
!
Fiber 1310nm auxiliary port
for 3
rd
party devices and
protocols
!
Full integration into SANE
and Optocore network
!
Optocore module with 2
LAN ports and 2 SANE/LAN
ports
!
4x RS485 or GPIO or
optional 4x Dual RS422
ports
!
Tri/Bi-Level sync with Word
Clock
! Redundant power supplies
!
Full control with Optocore
control software