User manual
Table Of Contents
- Contents
- 1. Introduction
- 2. hardware installation
- 3. briteport Setup wizard
- 4. Briteport Configuration tool
- A. Specifications
- B. Troubleshooting
- C. Frequently Asked Questions
- D. Glossary
- E. Warranty Information
- F. ContacT information
70
User Manual
BritePort 8120
configuration tool of BritePort 8120, please refer to the following steps:
1. Click Start -> Settings -> Control Panel. In the “Control Panel”
window, double-click the Network icon. In Windows 2000/XP, double-
click the Network and Dial-up Connections, and you also need to
double-click the Local Area Connection icon and then click the
Properties button to see the “Local Area Connection Properties” dialog
box.
2. When the “Network” dialog
box similar to Figure B-1
appears, click the
Configuration tab. Under
the “The following network
components are installed”
list, click your Ethernet card
to highlight it, for example,
TCP/IP->Realtek
RTL8139(A) PCI Fast
Ethernet Adapter. Then,
click the Properties button to
continue.
Figure B-1