User manual

User Manual
BritePort 8120
69
a cache memory on your computer. Next time when you access a recently
visited website, your browser immediately delivers the cached date on to
the screen. You should always empty the cache on a regular basis and after
a session of heavy web browsing.
 Delete temporary Internet files:
On the Internet Explorer go to the Internet Options window and click the
General tab. Under “Temporary Internet files,” click Delete Files and
click Yes to delete all temporary Internet files.
 Increase the cache:
According to your requirement, you may increase the cache size. On the
Internet Explorer go to the Internet Options window and click the
General tab. Under “Temporary Internet files,” click Settings. The
window that appears allows you to adjust the “Amount of disk space to
use” or the cache.
 Close all the open applications and reboot your computer:
Click Start -> Shutdown -> select Restart -> Yes. If warm reboot is
unsuccessful, shut off power to the computer and turn on after waiting for
a few seconds.
5) Web browser does not connect to the BritePort’s Configuration page
Cause You may not be using the correct IP address.
Solution Try the following:
 Make sure that the RJ-45 Ethernet cable that used to connect your PC to
BritePort 8120 is plugged in correctly and securely.
 In the URL field (Address field) of your Web browser, make sure that you have
typed the correct IP address: 192.168.1.1.
 Check your Network Properties to ensure that the option Obtain an IP
address automatically has been selected, or it is configured to the same
Subnet Mask as the BritePort’s IP address.
Note:
For information on how to configure your PC Network Properties to
automatcially detect and obtain an IP address, please refer to Chapter 3:
BritePort Setup Wizard. To manually specify the IP address and Subnet
Mask of your PC Network Properties in order to access the web-based