User manual

User Manual
BritePort 8120
55
In the “DNS Relay”
configuration page, type the
DNS server IP address in the
corresponding fields (see
Figure 4-22), and click Apply
to complete the changes.
Your DSL service provider
should provide you at least
one DNS Server IP address if
your DSL connection is via a
static or fixed IP address.
BritePort 8120 supports up to
3 DNS Server IP addresses.
DNS Server
Refer to Figure 4-23, this
“DNS Server” page allows
you to Disable or Enable the
DNS server. It also let you
manually create a new DNS
hostname. To do so, click
Create a new DNS hostname
entry manually to open the
“Create New Hostname Entry”
page. Enter the Hostname
and IP Address, and click
Apply to confirm the settings.
The newly added DNS
hostname will appear on the
“DNS hostname” table as seen on Figure 4-23.
Application Control
The Application Control allows you to set up the LAN to WAN Firewall and
Intrusion Detection through packet filtering.
Figure 4-22
Figure 4-23