User manual

User Manual
BritePort 8120
51
DSL Configuration (DSL)
DSL Configuation allows you
to change the Current DSL
Line Mode. The default line
mode is G.dmt. To change the
setting, click
and select a
different Line Mode from the
drop-down box. Click Apply
to confirm the new setting.
Once the DSL Line Mode is
changed, information in the
“DSL Configuration” table,
similar to Figure 4-14, such as
the DS Speed (Downstream
Speed) and US Speed (Upstream Speed) will also change reflecting the new setting.
Data in the “DSL Configuration” table is also linked to the “DSL Connection” page
under Status. (see Figure 4-5)
Note: You should not change the default Current DSL Line Mode unless instructed
by your DSL Service Provider.
LAN Configuration (LAN)
The “LAN Configuration” page is consisted of IP Address and DHCP Server. In the
blue title bar, select the item that you wish to configure.
IP Address
The “IP Address” page shows
the current IP address assigned
to access your BritePort 8120
web-based configuration tool.
Refer to Figure 4-15, your
BritePort 8120 supports up to
two subnets -- the Primary and
Secondary LAN. Typically,
in a small office or a home
office network environment,
only one subnet, the Primary
Figure 4-14
Figure 4-15