User manual

50
User Manual
BritePort 8120
Remote Management
Control
This function allows you to
establish access to manage
your DSL network while you
are at a remote location. (see
Figure 4-12) Depending on
your remote managment
needs, you can define the time
for each remote session, the
access protocol, as well as the
authorized remote IP for a
secure remote access. To set
the authorized remote IP, click
Secured Remote Client IP to
bring out the “Secure Remote
Client IP” window to set the
authorized client IP address
and Subnet Mask. Click
Apply to confirm the setup.
Web Port
The default web server port for
your BritePort 8120 is Port 80.
Refer to Figure 4-13, to
change the port setting, simply
type the new port number and
click Apply to store the new
setting. However, click Apply
will not execute the change.
To activate the new setting,
you must go to Save
Configuration, under
Maintenance, to save the
settings and restart your
BritePort 8120 unit.
Figure 4-12
Figure 4-13