User manual

46
User Manual
BritePort 8120
Traffic Counter
The Traffic Counter provides
the data access statistic of your
BritePort 8120. It shows the
transmitted and received
packets and bytes over the
LAN and WAN connections.
The data shown on the
“Traffic Counter” page (see
Figure 4-8) are read-only, and
similar to other pages under
Status, the information are
automatically refreshed about
every 30 seconds. You can
also manually click Refresh to
update the data.
Routing Table
The Routing Table provides
information on routing rules
set for your BritePort 8120.
All information on this pag
(see Figure 4-9) are read-only.
Your BritePort 8120 supports
both static and dynamic
routing. You can add, edit, or
delete the routing rules in the
“IP Route” page under
Advanced Setup. (see Figure
4-19 and Figure 4-20)
Similar to other pages under
Status, the data are
periodically auto-refreshed.
You can also click on Refresh
to manually update the
information.
Figure 4-8
Figure 4-9