User manual
Table Of Contents
- Contents
- 1. Introduction
- 2. hardware installation
- 3. briteport Setup wizard
- 4. Briteport Configuration tool
- A. Specifications
- B. Troubleshooting
- C. Frequently Asked Questions
- D. Glossary
- E. Warranty Information
- F. ContacT information
44
User Manual
BritePort 8120
Diagnostic Test
The Diagnostic Test allows you to ping the Default Gateway and Primary DNS as well
as testing the connections of your BritePort 8120 to both LAN and WAN networks. This
feature provides the convenience for troubleshooting when you work with a complex
LAN environment and/or are required to manage your DSL network at a remote location.
Running the Diagnostic Test will help you to identify the possbile causes of your DSL
network problems.
Refer to Figure 4-4, to run the
test, click the Test button next
to each category. The test
result will show under the
Result column.
Note: This Diagnostic Test
does not relate to the function
of DIAG LED indicator
located at the front panel of
your BritePort 8120.
DSL Connection
The DSL Connection provides
the basic technical details about
the DSL communication
between your DSL service
provider to your BritePort 8120.
The data is generated based on
the Current DSL Line Mode,
which is set in DSL
Configuration under the
Advanced Setup. Information
shows in the table includes
Speed, Latency, CRC Error, Up Time, etc, as similar to Figure 4-5.
The data are automatically refreshed about every 30 seconds. You can also manually
click Refresh to view the most updated information at anytime.
Figure 4-4
Figure 4-5