User manual
Table Of Contents
- Contents
- 1. Introduction
- 2. hardware installation
- 3. briteport Setup wizard
- 4. Briteport Configuration tool
- A. Specifications
- B. Troubleshooting
- C. Frequently Asked Questions
- D. Glossary
- E. Warranty Information
- F. ContacT information
User Manual
BritePort 8120
43
Status
The Status provides valuable information about your BritePort 8120 and your DSL service
setup. It is consisted of System Status, Diagnostic Test, DSL Connection, WAN (Wide
Area Network) Connection, Traffic Counter, Routing Table, and DHCP Table. Besides
the main “System Status” page, while you are in the Status section, all pages are
automatically refreshed approximately every 30 seconds.
System Status
The main “System Status” page
lists the Product Information,
WAN Information, and LAN
(Local Area Network)
information, similar to Figure
4-2.
These information reflect the
current settings of your
BritePort 8120 and the DSL
connection. All data are read-
only.
Located at the bottom of the
“System Status” page, there is
a Status Log button. Click the
button to view the recent
history of the DSL connection
logs between your BritePort
8120 and your DSL service
provider. (see Figure 4-3) A
new log is generated every
time when the System Status
information are refreshed.
Figure 4-2
Figure 4-3