User manual
Table Of Contents
- Contents
- 1. Introduction
- 2. hardware installation
- 3. briteport Setup wizard
- 4. Briteport Configuration tool
- A. Specifications
- B. Troubleshooting
- C. Frequently Asked Questions
- D. Glossary
- E. Warranty Information
- F. ContacT information
40
User Manual
BritePort 8120
5. Finally, a dialog box appears,
similar to Figure 3-28, to
prompt you to close your
browser window. Click Ye s
to close the window, or click
No to proceed for more
configurations in Advanced
Setup.
Congratulations! You have successfully configured your BritePort 8120. If you have
already configure your network computers for DSL connections, you may test the setup by
opening your Web browser from any computer on the network to access your favorite
website.
Important Notes:
• For instructions on how to configure your network computers to obtain an IP
address automatically for DSL connections, please refer to the section,
Configuring Your Computer, in this chapter.
• If you have configured your network computers but still unable to access the
Website, please refer to Appendix B: Troubleshooting for the possible causes
of problems, or contact your DSL service provider for assistance.
• To further customize the settings of your BritePort 8120 using the web-based
tool in order to meet the specific requirements of your LAN environment,
please refer to Chapter 4: BritePort Configuration Tool for information
about the Advanced Setup.
Figure 3-28