User manual

36
User Manual
BritePort 8120
6. In the “Configure IP
Information” page, similar to
Figure 3-21, enter the LAN
IP Address & Subnet Mask,
and DHCP IP Address range.
Once complete, click Next to
continue.
7. The Wizard Setup, at this
time, shows the summary
page listing all your settings.
(see Figure 3-22) Carefully
go through all the information
and verify their accuracy.
Click Save Settings to
confirm the configurations,
and BritePort 8120 will start
saving the settings.
8. Finally, a dialog box appears,
similar to Figure 3-23, to
prompt you to close your
browser window. Click Ye s
to close the window, or click
No to proceed for more
configurations in Advanced
Setting.
Figure 3-21
Figure 3-22
Figure 3-23