User manual
Table Of Contents
- Contents
- 1. Introduction
- 2. hardware installation
- 3. briteport Setup wizard
- 4. Briteport Configuration tool
- A. Specifications
- B. Troubleshooting
- C. Frequently Asked Questions
- D. Glossary
- E. Warranty Information
- F. ContacT information
34
User Manual
BritePort 8120
Configuring Your BritePort for Static IP
Depending on your LAN settings and public services that you are hosting, your DSL service
may be connected through one or multiple static or fixed IP addresses. In that case, you are
required to configure your BritePort 8120 using all the information provided by your DSL
service providers, including IP addresses, Subnet Mask, Gateway addresses, etc. Make sure
you have all the information ready before you start configuring your BritePort 8120.
Logging On To The Configuration Tool
1. Start the Web browser. In the URL
Address field of the browser window,
type 192.168.1.1 and press Enter.
This will take you to the login screen
of the Web tool for your BritePort
8120. (Figure 3-16)
To login for the first time, your default
username is “admin”, and the
corresponding password is also
“admin”, with all in lowercase letters.
Note: Make sure you type the correct
information to the User Name and
Password fields. The login
information is case sensitive.
2. The successful login will
open the web-based
configuration tool of your
BritePort 8120. The first
screen that you will see is the
welcome screen similar to
Figure 3-17.
Figure 3-16
Figure 3-17