User manual
Table Of Contents
- Contents
- 1. Introduction
- 2. hardware installation
- 3. briteport Setup wizard
- 4. Briteport Configuration tool
- A. Specifications
- B. Troubleshooting
- C. Frequently Asked Questions
- D. Glossary
- E. Warranty Information
- F. ContacT information
28
User Manual
BritePort 8120
Note:
If you do not see Local Area Connection, then go to Start -> Settings -> Network
and Dial-up Connections. Click on Network and Dial-up Connections will bring
out the “Network and Dial-up Connections” window.
In the “Network and Dial-up Connections” window, select and right-click the Local
Area Connection icon, and click the Perperties option will open the “Local Area
Connection Properties” dialog box.
2. In the “Local Area Connection Properties”
dialog box, similar to Figure 3-7, under
the list box, “Components checked are
used by this connection”, select Internet
Protocol (TCP/IP) and click Properties
to continue.
Figure 3-7