User manual

26
User Manual
BritePort 8120
3. When the “Network” dialog box similar to
Figure 3-3 appears, click the
Configuration tab. Under the list box of
“The following network components are
installed”, highlight the TCP/IP->[your
Ethernet card], for example, TCP/IP-
>Realtek RTL8139(A) PCI Fast
Ethernet Adapter, as shown in Figure 3-
3. Then click the Properties button to
bring out the “TCP/IP Properties” dialog
box.
4. As the “TCP/IP Properties” dialog box
,similar to Figure 3-4, appears, click the
IP Address tab to open the “IP Address”
dialog box.
Select the option, Obtain an IP address
automatically, and click OK to confirm
the change. The “Network” dialog box
appears active again.
5. Click OK to close the “Network” dialog
box.
Figure 3-3
Figure 3-4