User manual
Table Of Contents
- Contents
- 1. Introduction
- 2. hardware installation
- 3. briteport Setup wizard
- 4. Briteport Configuration tool
- A. Specifications
- B. Troubleshooting
- C. Frequently Asked Questions
- D. Glossary
- E. Warranty Information
- F. ContacT information
22
User Manual
BritePort 8120
Indicator LEDs on BritePort 8120
Indicator LEDs on Broadxent BritePort 8120
Your BritePort 8120 features indicator LEDs which provides you with your DSL connection
status. Refer to the Figure 2-6 and Table 2-1 for the function of each LED.
Table 2-1: Description of LEDs
LED Description
POWER On when BritePort 8120 is properly connected to a power source.
DIAG
On when BritePort 8120 performs self-test at the initial power up. Once the
normal operation is detected, the LED will remain off.
LAN
(1 to 4)
Flashes for a few seconds and stays on when an Ethernet connection is
detected. There are total four LAN LEDs.
DSL Flashes for a few seconds and stays on when a DSL connection is established.
Figure 2-6: LEDs on BritePort 8120
POWER DIAG LAN (1 to 4) DSL