User manual
Table Of Contents
- Contents
- 1. Introduction
- 2. hardware installation
- 3. briteport Setup wizard
- 4. Briteport Configuration tool
- A. Specifications
- B. Troubleshooting
- C. Frequently Asked Questions
- D. Glossary
- E. Warranty Information
- F. ContacT information
User Manual
BritePort 8120
21
Connecting Your LAN
Figure 2-5 illustrates a more complex DSL network conntection. You may connect your
LAN to BritePort 8120 as shown. It is recommended that you consult your DSL service
provider prior to setting up your DSL network for a more complex LAN configuration.
Note:
• You should always power on your BritePort 8120 first before you turn on your
computers; otherwise, for Windows 95/98/Me systems, you would need to reboot
the computers in order to detect the dynamic IP address for Internet connection.
• Your BritePort 8120 can also be connected to another router to create a
subnetwork. To set up your subnetwork for DSL connection, you are required to
configure the Advanced Setup. For details, please contact your DSL service
provider or refer to Chapter 4: BritePort Configuration Tool.
Figure 2-5: Connecting your LAN to BritePort 8120