User manual
Table Of Contents
- Contents
- 1. Introduction
- 2. hardware installation
- 3. briteport Setup wizard
- 4. Briteport Configuration tool
- A. Specifications
- B. Troubleshooting
- C. Frequently Asked Questions
- D. Glossary
- E. Warranty Information
- F. ContacT information
20
User Manual
BritePort 8120
Hardware Installation
Figure 2-4 illustrates the basic hardware connections of your BritePort 8120. Refer to
Figure 2-5 for a more in depth LAN connection.
Note:
• Make sure your BritePort 8120 is powered on when you configure computers on
your network for DSL connection.
• You should always power on your BritePort 8120 first before you turn on your
computers; otherwise, for Windows 95/98/Me systems, you would need to reboot
the computers in order to detect the dynamic IP address for Internet connection.
Figure 2-4: Connecting devices to BritePort 8120