User manual
Table Of Contents
- Contents
- 1. Introduction
- 2. hardware installation
- 3. briteport Setup wizard
- 4. Briteport Configuration tool
- A. Specifications
- B. Troubleshooting
- C. Frequently Asked Questions
- D. Glossary
- E. Warranty Information
- F. ContacT information
User Manual
BritePort 8120
17
10/100BASE-T port
Using the RJ-45 Ethernet cable, the 10/100BASE-T port connects your BritePort 8120 to the
Ethernet port on a PC. You can also use the Ethernet port on BritePort 8120 to connect
multiple computers through a hub. (Note: Using a proper Ethernet cable ,crossed or straight,
is required depending upon the type of port on the hub.) To support the configuration with
a hub, it is recommended that you first consult your DSL service provider.
RESET button
Allow you to restore your BritePort 8120 to the default password. If you forgot your login
information, this RESET feature will allow you to access the Web-based configuration tool
of BritePort 8120 using the manufacturer default username and password. It will not reset
your configuration.
ON/OFF switch
Use this switch to turn BritePort’s power supply ON or OFF. When you turn off the power
supply, wait for at least 10 seconds before turning it on.
12V DC In socket
Use only the supplied DC power adapter to power your BritePort 8120.