User manual
Table Of Contents
- Contents
- 1. Introduction
- 2. hardware installation
- 3. briteport Setup wizard
- 4. Briteport Configuration tool
- A. Specifications
- B. Troubleshooting
- C. Frequently Asked Questions
- D. Glossary
- E. Warranty Information
- F. ContacT information
User Manual
BritePort 8120
13
Customer Information Record
Use the following table to record the network configurations for your DSL service and
BritePort 8120. Keep this form in a safe place for your future references, in case if
re-configuration of PCs and/or networks are needed.
* If your DSL service provider uses Dynamic Host Configuration Protocol (DHCP), then you
will not be provided with this information.
Table 1: Important Information of your BritePort 8120 & DSL Connections
User ID and Password
E-mail Address
Outgoing Mail Server (SMTP)
Incoming Mail Server (POP3)
IP Address*
Subnet Mask*
Default Gateway*
Primary DNS Address*
Secondary DNS Address*
Virtual Path Identifier (VPI)**
Virtual Channel Identifier (VCI)**
BritePort’s IP Address 192.168.1.1
BritePort’s Subnet mask 255.255.255.0
Your IP Address during System Configura-
tion only
192.168.1.x
(x can have any value from 2 to 254)
DSL Service Provider’s Tech Support
phone number