User manual

10
User Manual
BritePort 8120
Important Safety Instructions
This section provides basic safety information for your Broadxent BritePort DSL Gateway
8120.
Prior to using BritePort 8120, carefully read and understand the safety instructions. These
instructions must be followed to reduce the risk of fire, electric shock, or personal injury.
• Make sure that the product, BritePort 8120, is not exposed to direct sunlight or exces-
sive heat radiation.
• Keep the product at a place where there is minimum risk of spilling any liquid.
• The surrounding ambient temperature must not exceed 40
0
C (104
0
F).
• Avoid humid conditions. Do not place the product near a water source or outlet such as
a bath tub, sink, wash bowl, laundry tub, swimming pool, rain, wet or humid wall, and
so on.
• Never clean the product with a damp cloth or use any liquid cleaner.
• Do not press, put any weight, or bend the power cord connected to a telephone equip-
ment.
• To avoid risk of an electric shock during lightning, do not use any telephone equipment
that is connected to an electric socket.
• In case of a gas leak, do not use any electric switch that is located in the vicinity of the
leak.
• To report a gas leak, do not use any telephone equipment that is connected to an electric
power outlet in the vicinity of the leak.
• Do not use any electric product, electric cord, or power socket that is even partially
damaged.
• Do not expose yourself to dangerous voltages by opening the cover of the product or
dismantling it.
• You must not access the internal assembly or circuit board of the product — none of its
parts are user replaceable.
• Do not dispose of the batteries in fire — they may explode and cause injury. Besides,
you must follow the local codes for special disposal instructions.
• If your modem needs any service or repairs, only qualified service personnel must han-
dle it.