User manual

User Manual
BritePort 8012-V1
10
Important Safety Instructions
This section provides basic safety information for your Broadxent BritePort DSL Bridge 8012-V1
modem.
Prior to using your modem, carefully read and understand the safety instructions. These instructions
must be followed to reduce the risk of fire, electric shock, or personal injury.
Make sure that your modem is not exposed to direct sunlight or excessive heat radiation.
Keep your modem at a place where there is minimum risk of spilling any liquid.
The surrounding ambient temperature must not exceed 40
0
C (104
0
F).
Avoid humid conditions. Do not place the product near a water source or outlet such as a
bath tub, sink, wash bowl, laundry tub, swimming pool, rain, wet or humid wall, and so on.
Never clean your modem with a damp cloth or use any liquid cleaner.
Do not press, put any weight, or bend the power cord connected to a telephone equipment.
To avoid risk of an electric shock during lightning, do not use any telephone equipment that
is connected to an electric socket.
In case of a gas leak, do not use any electric switch that is located in the vicinity of the leak.
To report a gas leak, do not use any telephone equipment that is connected to an electric
power outlet in the vicinity of the leak.
Do not use any electric product, electric cord, or power socket that is even partially
damaged.
Do not expose yourself to dangerous voltages by opening the cover of your modem or
dismantling it.
You must not access the internal assembly or circuit board of your modem — none of its
parts are user replaceable.
Do not dispose off the batteries in fire — they may explode and cause injury. Besides, you
must follow the local codes for special disposal instructions.
If your modem needs any service or repairs, only qualified service personnel must handle it.
Model and Serial Numbers
Your BritePort 8012-V1 has model and serial numbers. You can find it on the bottom of your modem.
Note down the model and serial numbers for future reference.