User manual

User Manual
BritePort 8012-G1
18
Hardware Installation
Connect your BritePort 8012-G1 as illustrated below:
1. Connect the RJ-45 Ethernet cable to the Ethernet ports on your computer and BritePort
8012-G1.
2. Locate a telephone wall outlet and unplug any telephone cable that is connected to it.
3. Connect one end of the RJ-11 phone cable provided into the telephone wall outlet.
4. Connect the other end into the DSL LINE port of your BritePort 8012-G1.
5. Connect the small round plug of the power adapter provided to the DSL Modem’s power
connector and plug your power adapter into a power outlet.
6. Turn on the power supply. If your BritePort 8012-G1 is set up correctly, the LAN LED
lights up.
7. If you have telephones and fax machines sharing the same phone line, connect them to the
telephone wall outlet or your BritePort 8012-G1 phone port with microfilters as shown in
Figure 2-2. The microfilters will help to ensure voice quality and data integrity.
Connecting Microfilters
Each analog device, such as a telephone equipment, fax machine, answering machine, or analog
Figure 1-3: Hardware Installation for BritePort 8012-G1