Unicorn 15 / 17 / 19 / 19W Single Rail Console with Modular KVM Switch User Manual Rev 4.
Unicorn series User Manual Packing List The complete Unicorn 15 / 17 / 19” single rail console with modular KVM switch package consist of: One 1U 19” rack mount console Two rails with front and rear bracket Two extended brackets Two Short brackets Two bracket attachments Unicorn 15 / 17 bracket attachment Unicorn 19 bracket attachment One 1.
Unicorn series User Manual Two rails with front and rear bracket One 1.8 m KVM cable (HDDB-15 / VGA + PS/2 x 2) One USB cable One DC power adapter One power cord One user manual CD One quick installation guide Two keys Six flat screws (for rail mount to console body) Check to make sure that the unit was not damaged in shipping. If you encounter a problem, contact your dealer.
Unicorn series User Manual rating of the cord should be greater than the voltage and the current rating marked on the product. 11. All cautions and warning on the equipment should be noted. 12. If the equipment is not in use for long time, disconnect the equipment from mains to avoid being damaged by transient over-voltage. 13. Never pour any liquid into ventilation openings; this could cause fire or electrical shock. 14. Never open the equipment.
Unicorn series User Manual Index of Contents Packing List .......................................................................................................... I Safety Instructions ............................................................................................... II Index of Contents .............................................................................................. IV 1. General Information ......................................................................................
Unicorn series User Manual 3.3.1 Configuring the Display Settings ............................................... 30 3.3.2 Connecting the Console ............................................................ 31 3.4 Turning on the Console......................................................................... 31 3.5 Testing the Console .............................................................................. 32 4. KVM Switch ..............................................................................
Unicorn series User Manual 1. General Information Unicorn series Single Rail consoles offer industrial level input solution to optimize your space utilization by controlling your systems in just 1U. With the unique modular design, you can easily integrate more than 17 models of KVM switches with different functions and expand the connections up to 8 levels of the KVM switches. 1.1 Feature Easy to install, single rail design.
Unicorn series User Manual by air. In case, you run out of the KVM switch stock, it is much cheaper to ship the KVM switch modules by air. 1.3 Advantage Easy to install: With the unique separate rail design. One man can install the Unicorn console easily. In case you need to maintain the console, you can easily uninstall without effecting the server above or below.
Unicorn series User Manual 1.4 1.4.1 Product Specification Unicorn 15 Specification Model name Unicorn 15 Number of ports 1 Dimension 470.1 x 447.5 x 44 mm / 18.5 x 17.6 x 1.7 inches Package Dimension 606 x 551.5 x 230 mm / 23.9 x 21.7 x 9.0 inches Net Weight 12 Kg / 26.46 lbs Gross Weight 19.5 Kg / 43.0 lbs Display Size 15 inches Panel Type Active Matrix TFT LCD Resolution Capabilities Maximum Resolution up to 1024 x 768 (XGA) Pixel Pitch Supports 0.297 mm x 0.
Unicorn series User Manual Figure 1-1.
Unicorn series User Manual 1.4.2 Unicorn 17 Specification Model name Unicorn 17 Number of ports 1 Dimension 470.1 x 447.5 x 44 mm / 18.5 x 17.6 x 1.7 inches Package Dimension 606 x 551.5 x 230 mm / 23.9 x 21.7 x 9.0 inches Net Weight 13 Kg / 28.7 lbs Gross Weight 20.5 Kg / 45.2 lbs Display Size 17 inches Panel Type Active Matrix TFT LCD Resolution Capabilities Maximum Resolution up to 1280 x 1024 (SXGA) Pixel Pitch Supports 0.264 mm x 0.
Unicorn series User Manual Figure 1-2.
Unicorn series User Manual 1.4.3 Unicorn 19 Specification Model name Unicorn 19 Number of ports 1 Dimension 520.1 x 447.5 x 44 mm / 24.5 x 17.6 x 1.7 inches Package Dimension 606 x 551.5 x 230 mm / 23.9 x 21.7 x 9.0 inches Net Weight 14 Kg / 30.9 lbs Gross Weight 21.5 Kg / 47.4 lbs Display Size 19 inches Panel Type Active Matrix TFT LCD Resolution Capabilities Maximum Resolution up to 1280 x 1024 (SXGA) Pixel Pitch Supports 0.098 mm x 0.
Unicorn series User Manual Figure 1-3.
Unicorn series User Manual 1.4.4 Unicorn 19W Specification Model name Unicorn 19W Number of ports 1 Dimension 527.2 x 436.4 x 43.8 mm / 20.8 x 17.2 x 1.7 inches Package Dimension 827 x 564 x 206 mm / 32.6 x 22.2 x 8.1 inches Net Weight 14 Kg / 30.9 lbs Gross Weight 21.5 Kg / 47.4 lbs Display Size 19 inches Panel Type Active Matrix TFT LCD Resolution Capabilities Maximum Resolution up to 1440 x 900 (WXGA) Pixel Pitch Supports 0.283 mm x 0.
Unicorn series User Manual Figure 1-4.
Unicorn series User Manual 2. Panel Controls and OSD Function Controls Description Soft power on/off button. Adjacent LED is lit when on. Auto-synchronize and scale down display to any valid factory preset timings. Auto Press to scroll the function you want to adjust. Press to scroll the function you want to adjust. Menu To access the main menu. This button also acts as the “Enter” button. Table 2-1. Panel Controls Figure 2-1. Unicorn 15 / 17 OSD Control Bar Figure 2-2.
Unicorn series User Manual automatically and also tune the panel to its best condition. 2.2 Input Source 1. Press the “menu” button. 2. Use the “Down” and “Up” button to scroll. Auto tune. Input Source Brightness Contrast Color Position Language Recall Exit 3. Press the“menu”button to enter,and you will see: VGA / DVI 4. Use the “Down” and “Up” button to select the input source of signal. 5. Press the “menu” button to enter 2.3 Brightness 1. Press the “menu” button. 2.
Unicorn series User Manual 2.4 Contrast 1. Press the “menu” button. 2. Use the “Down” and “Up” button to scroll. Auto tune. Input Source Brightness Contrast Color Position Language Recall Exit 1. Press the “menu” button to enter. 2. Use the “Down” and “Up” button to adjust the contrast of the display. 3. Press the “menu” button to enter. 2.5 Color 1. Press the “menu” button. 2. Use the “Down” and “Up” button to scroll. Auto tune.
Unicorn series User Manual 3. Press the “menu” button to enter. And you will see: Icon Description 9300°K To set CIE coordinates at 9300°K color 7500°K To set CIE coordinates at 7500°K color 6500°K To set CIE coordinates at 6500°K color User To set user defined CIE Auto color To auto adjust color Return To exit and return to the previous page Table 2-2. Icon Description 4. Use the “Down” and “Up” button to adjust the color of the display. 5. Press “menu” to enter. 2.6 Position 1.
Unicorn series User Manual 4. Use the “Down” and “Up” button to scroll. 5. Press the “menu” button to enter. 2.7 Language 1. Press the “menu” button. 2. Use the “Down” and “Up” button to scroll. Auto tune. Input Source Brightness Contrast Color Position Language Recall Exit 3. Press the “menu” button to enter. And you will see: English German French Italian Spanish 4. Use the “Down” and “Up” button to scroll. 5. Press the “menu” button to enter. 2.8 Recall 1. Press the “menu” button. 2.
Unicorn series User Manual Exit 3. Press the “menu” button to enter, and you will see: Yes/ No 4. Select “Yes” button then ‘Menu” button to recall the factory setting. Select “No “ to return to the previous page. 2.9 Exit Press the “exit” button to quit OSD menu. 2.
Unicorn series User Manual 3. 3.1 3.1.1 Installation Install Unicorn 15 / 17 / 19 into Cabinet Notes 1. Please check all peripherals according the list before installation. To make sure that the whole unit was not damaged and lost during shipping process. If you encounter any problem, please contact your dealer. 2. Before installation, make sure all peripherals and computer have been turned off. 3. The cabinet depth range must be in 504 ~ 1000 mm for 15” and 17” console (554 ~1000 mm for 19” console).
Unicorn series User Manual 3. Short bracket x 2 4. Bracket attachment x 2 Unicorn 15 / 17 bracket attachment Unicorn 19 bracket attachment 5. Screw (length = 6 mm) x 6 6. Screw x 6 7. Key x 2 3.1.3 Step A (Install Console) 1. Adjust rail until two screws appear.
Unicorn series User Manual 2. Loose (Not remove) seven screws. 3. Adjust rail to fit your cabinet 4. Install front and rear bracket on cabinet. 5. Tight seven screws up.
Unicorn series User Manual 6. Repeat step 1~5 for the other side. 7. Push console into rails. (Be careful rear box loose when take out console from carton.) 8. Unlock and pull rail–lock switch (left and right at the same time) then push console to the end. lock unlock rail-lock switch 9. Install three screws (length = 6 mm) in rear of the console. (Both sides) 10. Finish installation as below.
Unicorn series User Manual 3.1.4 Step B (Replace short bracket) 1. Remove seven screws. 2. Take two original brackets out. original bracket original bracket 3. Put short bracket to rear of the rail. short bracket 4. Install four screws (don’t tight-up) to combine rail, short bracket and bracket attachment. bracket attachment short bracket 5. Repeat step 1 ~ 4 for the other side. 6. Repeat step 3 ~ 10 of step A to finish the installation.
Unicorn series User Manual 3.1.5 Step C (Replace extended bracket): 1. Loose (Not remove) seven screws. 2. Release six screws. 3. Take rear bracket out. original bracket 4. Adjust rail and input extended bracket to rear of the rail then adjust extended bracket to fit your cabinet. Install unless 2~3 screws (don’t tight-up) upon the length you need. One is forbidden. extended bracket 5. Repeat step 1 ~ 4 for the other side. 6. Repeat step 3 ~ 10 of step A to finish the installation.
Unicorn series User Manual 3.1.6 Unload Steps 1. Make sure the console has locked and turned off. 2. Loose two thumb screws and pull modular KVM switch out. 3. Release three screws in rear of the console. (Both sides) 4. Unlock. 5. Pull console out until console lock.
Unicorn series User Manual 6. Pull rail-release switch and pull console out.(Both sides. Be careful when pull out console.) rail-release switch 7. Push rail-lock switch on the rail and push rail back.
Unicorn series User Manual 3.2 Install 19” Wide-screen Single Rail Console into Cabinet 3.2.1 Notes 1. Please check all peripherals according the list before installation. To make sure that the whole unit was not damaged and lost during shipping process. If you encounter any problem, please contact your dealer. 2. Before installation, make sure all peripherals and computer have been turned off. 3. The cabinet depth range must be in 590 ~ 830 mm. Contact your dealer for deeper cabinet application. 4.
Unicorn series User Manual 3.2.3 Install Console Steps 1. Adjust rail until two screws appear. Loose (Not release) two rear screws then adjust rear bracket to fit your cabinet. Rail 2. Install front and rear bracket on cabinet. 3. Tight-up two rear screws. 4. Repeat step 1~3 for the other side.
Unicorn series User Manual 5. Pull rail until it lock and keep the part A in front of the rail (Both sides).Then push console into left and right rails. (Be careful rear box loose when takeout console from carton.) Part A 6. Pull rail–release switch (left and right at the same time) then push console to the end. Rail-release switch 7. Install three screws in rear of the console (Both sides). 8. Finish installation as below.
Unicorn series User Manual 3.3 Install Modular KVM Switch 3.3.1 Hardware Kits Contents 1. Bracket with thumb screw x 2 2. Screw (length = 6 mm) x 4 3.3.2 Install Modular KVM Switch Step 1. Install two screws (length = 6 mm) to combine bracket and KVM switch. (Both sides) 2. Push KVM switch into the rails from rear of cabinet.
Unicorn series User Manual 3. Tight thumb screw of bracket up to fix KVM switch in console and finish installation.
Unicorn series User Manual 3.4 Installing the Video Card and Video Driver Before connecting the LCD console, make sure your computer has a video card already installed for the panel. After you connect the console, install the video software driver. The video driver is supplied by the video card manufacturer and may be found on the CD-ROM that came with your computer. If you need information on installing a video card or video driver, refer to the manual that came with your video card. 3.4.
Unicorn series User Manual 3.4.2 Connecting the Console To connect an LCD console to a computer, perform the following steps 1 2 3 4 567 1. KVM dock (Only for Mercury / Mars / Venus series KVM Switch use.) 2. DC in 3. VGA port 4. PS/2 keyboard 5. PS/2 mouse 6. PS/2 mouse 7. PS/2-USB select Figure 3-1. The Rear View of LCD Console 1. Turn off your computer. You should always turn off your computer before connecting or disconnecting a device. 2.
Unicorn series User Manual 3.6 Testing the Console To test that the console is working properly, perform the following steps: 1. Power up the console, and then turn on your computer. 2. Make sure the video image is centered within the screen area. Use the OSD controls to adjust the image (see note below) or press the Auto button on the left or underneath of the panel.
