User's Manual

Blink: Connected to2G network
Red
Solid:No Service/Device Error
WiFi LED
Blue
Solid:No Client
Blink: Client is actived
Blink: WPS is actived
Blink:
Turn
on-0.2s
Turn
off-0.1s
Installation
Follow the diagram to install the SIM card and SD card
Tips: Always switch the device off and disconnect the charger before removing the
battery.
1. Remove the back cover and battery;
2. Insert the SIM card and SD card. Ensure that the contact area on the card is facing
down and that the beveled corner on the card is facing the beveled corner on the
holder.
3. Align the battery contacts with the battery compartment connectors, and insert
the battery. Replace the back cover lastly.
Charge