User manual

LinkMAX



 HSA300A User Manual

Page 39 of 49

To setup a DHCP Server, users must enter the following information:

• IP Range Start / IP Range End

The IP Range fields specify the IP addresses used by DHCP server.

The IP range must be set within the modem's subnet.

This range also determines the number of DHCP clients supported

(HSA300A supports a maximum number of 100 clients).

• Lease Time

The Lease Time field specify when will the IP address leased out

expire. This field is set in terms of seconds. The default value is 86400

(one day), which is also the maximum value allowed.

• DNS Server Primary / DNS Server Secondary

The domain name servers (DNS) specifies a list of Domain Name

System name servers. This value is obtained from the ISP and should

be entered. If PPPoE or PPPoA connection method is used, the

modem LAN IP address can be entered into the DNS Server Primary

field because the modem can relay DNS requests to the actual DNS

servers of ISP.