Manualshelf

User manual

ManualsBrandsBroadMax Technology ManualsComputer equipmentLinkMAX HSA300
31323334353637383940
LinkMAX
HSA300A User Manual
Page 33 of 49
Copyright ©2003 BroadMax Technology Limited
To setup an IPoA service, users are required to enter the following
information:
• Modem IP Address
The IP Address for the Ethernet (LAN) port of the modem. This is also
the IP address for connecting web-based configuration. Modem IP
address and IP addresses of computers it connects to should be in the
same subnet. The default value is the modem IP currently in use.
• Modem Subnet Mask
The Subnet Mask for the Ethernet (LAN) port IP. This field is usually
set to have same value as the subnet mask of the computers modem
connects to. The default value is the modem subnet mask currently in
use.
• NAT (Enable / Disable)
NAT (Network Address Translation) is required when a small local area