User manual

LinkMAX

 HSA300 User Manual
82
The ATM VCC Configuration table displays the following fields
(contact your ISP to determine these settings):
Field Description
Interface
The name of the lower-level interface on which this
VC operates. The low-level interface names are
preconfigured in the software and identify the type of
traffic that can be supported, such as data or voice.
Internet data services typically use an AAL5-type
interface.
Vpi, Vci, and Mux
Type
These settings identify a unique ATM data path for
communication between your ADSL/Ethernet router
and your ISP.
Max Proto per
AAL5
If you are using an AAL5-type of interface, this
setting indicates the number of higher-level interfaces
that the VC can support (the higher level interfaces
can be PPP, EoA, or IPoA interfaces). Contact your
ISP to determine which connection protocol(s) they
require.
Actions
Displays an icon (
) you can click on to delete the
associated interface.
Adding ATM VCCs
You may need to create a VCC if none has been predefined on
your system or if you use multiple services with your ISP. Each
service may require its own VCC. Follow these instructions to add a
VCC:
1. From the ATM VCC Configuration page, click
.
The ATM VCC – Add page displays, as shown in Figure 42.
Figure 42. ATM VCC – Add Page