User manual

LinkMAX



 HSA300 User Manual

Introduction

Congratulations on becoming the owner of HSA300 ADSL Ethernet

bridge/router. Your LAN (local area network) will now be able to

access the Internet using your high-speed ADSL connection.

This User Guide will show you how to install and set up HSA300

ADSL Bridge/Router, and how to customize its configuration to get

the most out of your new product.

Features

! Internal ADSL modem for high-speed Internet access

! 10/100Base-T Ethernet router to provide Internet

connectivity to all computers on your LAN

! USB port for connecting a USB-enabled PC

! Network address translation (NAT), Firewall, and IP filtering

functions to provide security for your LAN

! Network configuration through DHCP Server and DHCP

Relay

! Services including IP route and DNS configuration, RIP,

and IP and DSL performance monitoring

! Configuration program you access via an HTML browser

System Requirements

In order to use HSA300 ADSL/Ethernet router, you must have the

following:

! ADSL service up and running on your telephone line, with

at least one public Internet address for your LAN

! One or more computers each containing an Ethernet

10Base-T/100Base-T network interface card (NIC) and/or a

single computer with a USB port

! An Ethernet hub/switch, if you are connecting the device to

more than one computer on an Ethernet network.

! For system configuration using the supplied web-based

program: a web browser such as Internet Explorer v5.0 or

later, or Netscape v4.7 or later