User manual

LinkMAX

 HSA300 User Manual
54
Viewing NAT Global Settings and Statistics
To view your NAT settings, log into Configuration Manager, click the
Services tab. The NAT Configuration page displays by default, as
shown in Figure 24.
Figure 24. NAT Configuration Page
The NAT Configuration page contains the following elements:
! The NAT Options drop-down list, which provides access to
the Global Information page (shown by default), the NAT
Rule Configuration page, and the NAT Translations page,
which shows current translations.
! Enable/Disable radio buttons, which allow you to turn on or
off the NAT feature.
! The NAT Global Information table, which displays the
following settings that apply to all NAT rule translations:
Field Description
TCP Idle Timeout (sec)
For a NAT translation session on data that
uses the TCP protocol, the translation will no
longer be performed if no matching data
packets are received after the specified time
has elapsed.
TCP Close Wait (sec)
For a NAT translation on data using the TCP
protocol, after a communication session has
been closed, the translation will no longer be
performed if no matching data packets are
received after the specified time has elapsed.
TCP Def Timeout (sec)
For a NAT translation session on data that
uses the TCP protocol, the translation will no
longer be performed if no matching data
packets are received after the specified time
has elapsed.
UDP Timeout (sec)
Same as TCP Idle Timeout, but for UDP
packets.
ICMP Timeout (sec)
Same as TCP Idle Timeout, but for ICMP