Manualshelf

User manual

ManualsBrandsBroadMax Technology ManualsComputer equipmentLinkMAX HSA300
51525354555657585960
LinkMAX
HSA300 User Manual
51
A page displays to confirm your changes, and then the program
returns to the DHCP Relay Configuration page.
6. Follow the instructions in “Setting the DHCP Mode” on
page 51 to set the DHCP mode to DHCP Relay.
Setting the DHCP Mode
You should set the DHCP mode only after you have configured
DHCP relay or DHCP server settings. See “Configuring DHCP
Server” on page 45 or “Configuring DHCP Relay” on page 50 for
additional instructions.
Follow these instructions to set the DHCP mode:
1. Click the LAN tab, and then click DHCP Mode in the task
bar.
2. From the DHCP Mode drop-down list, choose DHCP Server,
DHCP Relay, or none.
If you choose none, your LAN computers must be configured
with static IP addresses.
3. Click
.
4. Click the Admin tab, and then click Commit & Reboot in
the task bar.
5. Click
to save your changes to permanent
memory.