User manual

LinkMAX



 HSA300 User Manual

Configuring a computer connected to the USB port

If HSA300 includes a USB port for connecting to a PC, you must

install the provided USB driver software on the PC. The driver

enables Ethernet-over-USB communication with HSA300.

Configuring the USB computer is a two-part process:

! In Part 1, you install the USB driver on the PC.

! In Part 2, you configure the IP properties on the USB PC.

Part 1. Installing the USB Driver:

1. Ensure that the USB cable is not connected to the USB

port on the PC or to the USB port on the G8100 device. The

installation program will prompt you when to connect the

cable.

2. Copy the USB installation file to a temporary directory on the

USB computer.

3. In the folder where you copied the files, double-click on

setup.exe to start the installation program.

The Welcome dialog box displays, as shown in Figure 4:

Figure 4. USB Driver Installation: Welcome Screen