User guide

3711 Phone Page 41
15-601084 Issue 05b (03 October 2008)IP Office
Menus: Caller Filter
3.10 System
Registration Code
The phone can be manually registered on up to 10 different DECT systems. Before you can make a call via the DECT
system, the phone has to be registered to the system. A system ID and registration code are necessary for the
registration process. When the phone is not subscribed to the system, ”Please, subscribe” is displayed.
This is for information only. Please contact your system administrator to register the phone.
All settings in this chapter are started by pressing the softkeys:
Menu System OK
Registering the Telephone to the DECT System
Subscription OK Options New / OK IPEI: 12......... OK PARK OK PIN Authentication code OK
System name OK Local phone number OK
The following entries must be made when logging on:
· Enter PARK - a system ID should only be entered if you are at a location where two DECT systems overlap. If
only one DECT system is available, then just press OK.
· Enter Auth.Code - this code is used to get access to register the phone (authentication code). The DECT
system supplies this code.
· Enter System Name - enter the name of the DECT system which you are registering. This will be shown on
the idle display. For information concerning the entry of characters, see Entering Characters/Names .
· Enter Local Number: - the phone number, assigned to your DECT phone, can be entered here (ask your
system administrator for the phone number).
Selecting the DECT System
Subscription OK select a System Options Select OK
If the phone has been registered to several DECT systems, then you can select which one the phone is to be used with.
Select the system via the arrow keys before confirming ”Select”. By choosing Options Select, the function automatic
search is disabled. The selected system is displayed.
Automatic Search System
Subscription OK Auto. Search Option Select OK
If you have registered your phone with several DECT systems and this function is active (” ”), then the phone will
automatically select one of the systems. Your phone is automatically ”logged-in” to another of the registered DECT
systems, as soon as you move out of the effective range of the current system. This function is disabled if a specific
system is selected by the select option.
Deleting a System
Subscription OK select a System Options Delete OK Sure? OK
Use the arrow key to select the system, before you choose Options Delete . This function removes subscription
information from your phone for the selected DECT system, not at the DECT system.
· Note: After execution of this function, the phone cannot be used on that DECT system. To use it again, you must go
through the registration procedure for the DECT system and the phone.
29