Specifications

Product Description
IP Office Release 7.0
© 2011 AVAYA All rights reserved.
Page 74
Issue 22.a.- (21 March 2011)
PBX Mode
The system can operate in Key System mode (default) where all lines appear on all telephones; or can be
administered to operate in PBX-mode. PBX-mode provides 3 Intercom buttons per telephone which work similar
to System Access buttons (provides intercom dial tone, d1al 9 to access an outside line).
Note: On PARTNER ETR sets, the system provides 2 Intercom buttons per telephone.
Personal Line Termination
Allows you to assign a line / lines to specific extension / extensions.
Personalized Station Ringing
Allows you to assign a personalized ring pattern to an extension
POTS (Plain Old Telephone Set) Support
POTS (single line analog telephones) are supported on the system. They are connected to an analog station
port on the Combo module; a port on the Phone-2, Phone-8 or Phone-16 module, or to an ETR port.
Privacy
Privacy prevents other users from joining on your call.
Recall
Use this feature to send a timed switch hook flash over the telephone line to “recall” a new dial tone or to
access certain central office features, such as Call Waiting or 3-way calling.
Redialing Features
There are 2 features which offer redial functionality:
There are 2 features which offer redial functionality:
· Last Number Redial (FEATURE 05): Last Number Redial redials all digits dialed on the last outside call
except account codes.
· On 1400 series telephones, there is a fixed Redial button, which allows you to scroll through and
redial the last 20 number called from that telephone set..
· Save Number Redial (FEATURE 04): Saves into temporary memory the last outside number (up to 28
digits) dialed from a system telephone. Use this feature to save a number before you hang up on a busy
or unanswered call. Once saved, the number can be redialed at any time. The number stays in memory
until a different one is saved.
Remote Call Forwarding / Mobile Twinninng
There are two types of Remote Call Forwarding supported on PARTNER Version:
1.
Remote Call Forwarding (FEATURE 11) allows a user to send internal and external calls destined
for a particular extension to an external phone number (off the system) over an analog trunk. Remote
Call Forwarding will not alert the internal extension, but immediately sends the call out to the
predefined number.
2.
Mobile Twinning allows a user to send internal and external calls destined for a particular extension
to an external phone. The call simultaneously rings at the internal extension and receives the
extensions coverage (including Voicemail) treatment if the call has not been answered. This feature is
only available on systems that have digital trunks (SIP, PRI/T1).