Specifications

Product Description
IP Office Release 7.0
© 2011 AVAYA All rights reserved.
Page 62
Issue 22.a.- (21 March 2011)
Note : For further details on the telephones, please refer to the telephones chapter.
Analog "POTS" telephones
The system supports a wide variety of industry standard analog telephones and devices, for example: fax
machines, credit card readers; wireless headsets, cordless telephones.
Analog devices are connected to the system:
· To one of the analog ports on the Combination Card
· Via a Phone 2 or Phone 8 Module
The major features work the same, regardless how they are connected: e.g. Hold, Conference, Transfer, Call
Waiting, Message Waiting, Incoming Caller ID.
Analog telephones have access to all dial-code features familiar to PARTNER users: e.g. Call pickup, Line
pickup, Call Forwarding activation/deactivation, etc.
Analog telephones connected to a phone module or Combination Card default to intercom dial tone. To place an
outgoing call, the user will dial 9. Analog telephones connected to an ETR module follows programmed
Automatic Line Selection.
System Administration
The Norstar Version and IP Office Essential Edition in Quick Mode can be programmed in 2 ways:
· Telephone User Interface (TUI) from extension 10 or extension 11; and uses the same administration
codes as the Norstar system (see Table 1).
TUI programming is an alternate way to do System Administration and Programming on the Norstar
Version. It is based on the Norstar TUI, but with improvements.
Using TUI System Administration on ETR, 1400, 9500 and select Norstar telephones, the buttons under
the display become soft-keys which are used to navigate and change the administration items. There are
also shortcut codes which enable the administrator to jump to particular administration items.
Centralized Programming is similar to System Administration, but it is used to administer buttons and
other options for any telephone in the system.
Individual Programming continues to be supported, allowing the telephone user to program buttons on
their telephones.
· Graphical User Interface (GUI) – Norstar Version provides a “Simplified Manager” mode in the IP Office
Manager software; allowing you to program the system in less than 30 minutes.
“Simplified Manager” is a PC GUI application inherent to the IP Office Manager application. Although
system administration can be completed via either the TUI or GUI method; some advanced features
such as SIP and PRI/E1 administration require the Manager application.
When you execute Manager, the program searches for any IP500 V2 units running Norstar Version on
your network and will automatically connect using the default login and password. You are then
presented with a “Simplified Manager” Screen: