Specifications
Product Description
IP Office Release 7.0
© 2011 AVAYA All rights reserved.
Page 46
Issue 22.a.- (21 March 2011)
Intercom Dial Codes
· ‘I’ represents the INTERCOM button.
· ‘XX’ represents a system extension number.
· ‘G’ represents a single-digit group number.
· ‘LL’ represents a system line number.
Intercom Dial
Code
Feature
I6XX
Call Pickup
I66G
Group Pickup
I68LL
Direct Line Pickup—Active Line
I70
Loudspeaker Paging
I*70
Simultaneous Paging
I7G
Group Calling—Ring
I*7G
Group Calling—Page
I77G
Group Hunting—Ring
I*77G
Group Hunting—Voice Signal
I8LL
Direct Line Pickup—Idle Line
Intercom Dial Tone (#309)
Use this feature to determine the type of dial tone that the system provides at an extension. It may be
necessary to change this setting to Machine (outside line) dial tone for an autodialing device, such as a fax or
modem, that has trouble making calls. For example, if you have a modem that checks for outside line dial tone
before dialing, use this procedure to change from Regular to Machine dial tone.
Intercom Manual Dialing
Users can make an internal call to another extension by ringing it (dialing its extension number) or voice
signaling the extension by prefixing the extension number with a *.
Line Coverage Extension (#208)
Use this feature to identify an extension as the “owner” of a specific outside line, so the extension can activate
Call Coverage or VMS Cover for that line.
Line Ringing Options
This feature specifies the options: Immediate Ring, Delayed Ring or No Ring for incoming calls on a line
appearance programmed on the extension.
Log All Calls
Up to 3 extensions can be designated to log all calls, both answered and unanswered, regardless of where they
terminated in the system.
Message Alert Notification (FEATURE 27)
Message Alert Notification allows any ETR or Digital telephone, programmed with Auto Intercom buttons, to see
which users have new messages waiting in their mailbox.
When the Message Alert Notification button is pressed, the DSS/BLF buttons programmed on the user’s
telephone will display a flashing red LED when the associated user has new voice mails waiting.
This feature may be left on at all times or deactivated by pressing the Message Alert button again.