Specifications

Product Description
IP Office Release 7.0
© 2011 AVAYA All rights reserved.
Page 42
Issue 22.a.- (21 March 2011)
CO Disconnect Time (Programmable)
Use this feature to change the hold disconnect time for an outside line. Different telephone companies use
different length signals. The length of the signal is called the CO or Hold Disconnect time. If you place a call on
hold and the caller hangs up, but the call does not disconnect within a minute after the caller.
Conference Drop
On 1400 and 9500 digital telephones, you may choose which specific party you want to drop from a conference
call. On ETR and analog telephones, the last party added to the conference call is automatically dropped.
Conferencing
The system supports up to 64-party conferencing. A maximum of 2 analog lines can be in any conference call.
Conference calls may consist of combinations of analog lines, digital lines (PRI/T1, SIP), analog telephones, ETR
telephones or digital telephones.
Contact Closure Support for 2 Devices (FEATURE 41 and FEATURE 42)
The IP500 V2 Control Unit has a Contact Closure control jack on the back panel. This is a 3.5 mm stereo jack
that can drive two external adjunct relays.
This feature allows users at eligible extensions to control an external adjunct by entering feature codes at their
system or standard telephone. The port can control a variety of devices, the most common being door strikes,
night bells, lighting, or voice recording systems.
Copy Settings (#399)
This feature allows a System Administrator to copy extension-specific programming from one extension to
another. When the Extension Copy operation is performed, the destination extension will have the same
properties as the originating extension.
Extension Copy can only be performed from an Attendant Extension in System Programming Mode or from the
Windows Manager PC application.
Dial Code Features
· ‘F’ represents the FEATURE button.
· ‘I’ represents the INTERCOM button.
· ‘XX’ represents a system extension number.
· ‘PP’ represents a Personal Speed Dial code.
· ‘G’ represents a single-digit group number.
· ‘LL’ represents a system line number.
Feature
Partner Version
Code
Norstar/BCM
Code
Do Not Disturb
F01
F85
Do Not Disturb Cancel
F01
F#85
Recall
F03
F71
Save Number Redial
F04
F67
Last Number Redial
F05
F5
Conference Drop
F06
F934 (new)
Privacy
F07
F83
Call Forward
F11
F4
Call Forward Cancel
F11
F#4