Specifications

Product Description

IP Office Release 7.0

Page 40

Issue 22.a.- (21 March 2011)

· Auto Dial – ICM Page (voice signaling)

Automatic Callback

When calling an extension that is busy, press the Auto Callback softkey and the system will call you when the

extension becomes free.

Automatic Daylight Savings Time (#126)

This feature automatically updates the system clock for annual Daylight Savings Time and Standard Time

changes. Turn this feature off if you live in an area without daylight savings time.

Automatic Extension Privacy (#304)

Prevents other extensions with access to the same line from joining a call from their extension. Use this feature

for extensions connected to a modem, fax, or any device whose function can be disrupted by someone trying to

join it.

Automatic Line Selection

Specifies the order in which the system selects an available line (intercom or outside) when a user at the

extension lifts the handset or presses SPEAKER to make a call without first selecting a specific line button.

For extensions with analog telephones, set Automatic Line Selection to intercom first. This enables analog

telephones to access system features, including intercom calling. When users lift the handsets on analog

telephones, they hear intercom dial tone. To access an outside line, they must dial 9.

Automatic Voice Mail Coverage (#310)

Use this feature to program a button to turn VMS Cover on and off, routing unanswered intercom and

transferred calls for a users’ extension to the Call Answer Service of the voice messaging system after the

specified number of rings (factory setting is three rings).

Backup Failure Alarm

When an Automatic Backup fails, a ‘Backup Failed’ message is displayed on Extension 10 and 11.

Backup Programming - Automatic

The system does a nightly backup to the system SD card. No manual intervention or external PC is required.

Backup Programming - Manual (#124)

The administrator may do a manual system programming backup to the system SD card via the TUI.

Bridging (Joining Calls)

A user can bridge (join) on any active call by pressing the associated CO line button (assuming Privacy is not

active on the originating extension.) When a call is bridged, the red and green LED’s will alternate on all

telephones which are bridged on the call.

Call Coverage (FEATURE 20)

This feature is used to redirect all Intercom, Transferred, DID and outside calls from a user’s extension to

another extension.

When Call Coverage is activated, covered calls are routed to the covering extension after a specified number of

rings.