Specifications
Product Description
IP Office Release 7.0
© 2011 AVAYA All rights reserved.
Page 262
Issue 22.a.- (21 March 2011)
· User mailbox with Message Waiting Light support
· Forward voicemails between known remote users
· Fully-featured VoiceMail Pro at every branch office
· VoiceMail Pro Networked Messaging will only accept an incoming voicemail message for a local
mailbox. It will NOT forward it to a remote Voicemail server. If required, this facility is available
through Avaya Interchange.
· VoiceMail Pro Networked Messaging is limited to Avaya Messaging Servers (not third-party
messaging platforms).
Common Networking Features
Alternate Route Selection
Alternate Route Selection (ARS) allows calls to be routed via the optimum carrier. Time profiles can also be
used to allow customers to take advantage of cheaper rates or better quality at specific times of day.
If a primary trunk is unavailable or congested, then ARS provides automatic fallback to an available trunk (e.g.,
analog trunk fallback if a T1 or SIP trunk fails, or use PSTN for SCN fallback).
Multiple carriers are supported. For example, local calls are to go through one carrier between specific hours
and international calls through an alternative carrier. Carrier selection using 2-stage call set up via in-band
DTMF is possible. It is possible to assign specific routes on a per user basis, e.g. only allow expensive routes to
be used by critical staff.
Note: Existing Least Cost Routing (LCR) configurations are automatically converted to ARS when upgrading to
4.1 or higher.
Network Numbering Schemes
IP Office uses fully flexible network numbering options. Dialed digits can be manipulated to add or remove
digits, access codes etc. in order to fit into any numbering scheme. Two types of numbering schemes are
commonly deployed - 'Linked Numbering' and 'Node Numbering' schemes. In linked numbering schemes each
site within the network has a unique range of extension numbers and users simply dial the extension number of
the called party. Often, linked numbering schemes are used in very small networks (< 5 sites) with less than
500 extensions. With node numbering schemes each site is given a node ID and this is prefixed by the user
when dialing extensions at other sites. In this way extension numbers can be replicated across sites while still
appearing unique across the network. Node numbering schemes are common in larger networks. Linked
numbering schemes and node numbering schemes are sometimes both used within the same network with
node numbering used at the large offices and linked numbering employed at clusters of satellite offices.
The following figures depict these two types of numbering schemes.