Datasheet

Figure 18. Tape leader and trailer dimensions.

END START

THERE SHALL BE A

MINIMUM OF 160 mm

(6.3 INCH) OF EMPTY

COMPONENT POCKETS

SEALED WITH COVER

TAPE.

MOUNTED WITH

COMPONENTS

THERE SHALL BE A

MINIMUM OF 160 mm

(6.3 INCH) OF EMPTY

COMPONENT POCKETS

SEALED WITH COVER

TAPE.

MINIMUM OF

230 mm

(9.05 INCH)

MAY CONSIST

OF CARRIER

AND/OR

COVER TAPE.

Convective IR Reflow Soldering

For more information on IR

reflow soldering, refer to

Application Note 1060, Surface

Mounting SMT LED Indicator

Components.

Storage Condition:

5 to 30°C @ 60% RH max.

Baking is required under the

condition:

1. Humidity Indicator Card is >

10% when read at 23± 5°C.

2. Device expose to factory con-

ditions < 30°C/60% RH more

than 672 hours.

Baking recommended condition:

60 ± 5°C for 20 hours.

For product information and a complete list of distributors, please go to our website: www.avagotech.com

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries.

AV01-0685EN December 10, 2006