Datasheet

2
As AlGaAs
Red Description
HSMH-C110 Untinted, Non-Di used
HSMH-C120 Untinted, Non-Di used
HSMH-C150 Untinted, Di used
HSMH-C170 Untinted, Di used
HSMH-C190 Untinted, Di used
HSMH-C191 Untinted, Di used
HSMH-C265 Untinted, Non-Di used
Device Selectiion Guide
GaP
Green HER Orange Yellow Description
HSMG-C110 HSMS-C110 HSMD-C110 HSMY-C110 Untinted, Non-Di used
HSMG-C120 HSMS-C120 HSMD-C120 – Untinted, Non-Di used
HSMG-C150 HSMS-C150 HSMD-C150 HSMY-C150 Untinted, Di used
HSMG-C170 HSMS-C170 HSMD-C170 HSMY-C170 Untinted, Di used
HSMG-C177 HSMS-C177 HSMD-C177 HSMY-C177 Untinted, Di used
HSMG-C190 HSMS-C190 HSMD-C190 HSMY-C190 Untinted, Di used
HSMG-C191 HSMS-C191 HSMD-C191 HSMY-C191 Untinted, Di used
HSMG-C197 HSMS-C197 HSMD-C197 HSMY-C197 Untinted, Di used
HSMG-C265 – – – Untinted, Non-Di used
Package Dimensions
HSMx-C150 HSMx-C170
3.2 (0.126)
0.5 (0.020)
0.50 ± 0.2
(0.020 ± 0.008)
0.6 (0.024)
POLARITY
[3]
CATHODE
MARK
1.1 (0.043)
0.50 ± 0.2
(0.020 ± 0.008)
2.0 (0.079)
DIFFUSED
EPOXY
PC BOARD
SOLDERING
TERMINAL
1.6 (0.063)
(ANODE MARK FOR
HSMH-C150)
CATHODE LINE
(ANODE LINE
FOR HSMH-C150)
2.0 (0.079)
0.3 (0.012)
0.4 ± 0.15
(0.016 ± 0.006)
0.3 (0.012)
POLARITY
[3]
CATHODE
MARK
0.8 (0.031)
0.4 ± 0.15
(0.016 ± 0.006)
1.4
(0.055)
DIFFUSED
EPOXY
PC BOARD
SOLDERING
TERMINAL
1.25 (0.049)
(ANODE MARK FOR
HSMH-C170)
CATHODE LINE
(ANODE LINE
FOR HSMH-C170)
Notes:
1. All dimensions in millimeters (inches).
2. Tolerance is ±0.1 mm (±0.004 in.) unless otherwise speci ed.
3. Polarity for HSMH-Cxxx will be the opposite of what is shown on above drawings.