Datasheet

Notes:

1. All dimensions in millimeters (inches).

2. Tolerance is ±0.1 mm (±0.004 in.)unless otherwise speci ed.

Figure 20. Tape leader and trailer dimensions.

Convective IR Re ow Soldering

For more information on IR re ow

soldering, refer to Application Note

1060, Surface Mounting SMT LED

Indicator Components.

Storage Condition: 5 to 30˚ C

@ 60% RH max.

Baking is required under the

condition:

a) Humidity Indicator Card is

>10% when read at 23 ± 5°C.

b) Device exposed to factory

conditions <30°C/60% RH

more than 672 hours.

Baking recommended condition: 60

+/– 5˚C for 20 hours.

END START

THERE SHALL BE A

MINIMUM OF 160 mm

(6.3 INCH) OF EMPTY

COMPONENT POCKETS

SEALED WITH COVER

TAPE.

MOUNTED WITH

COMPONENTS

THERE SHALL BE A

MINIMUM OF 160 mm

(6.3 INCH) OF EMPTY

COMPONENT POCKETS

SEALED WITH COVER

TAPE.

MINIMUM OF

230 mm

(9.05 INCH)

MAY CONSIST

OF CARRIER

AND/OR

COVER TAPE.

For product information and a complete list of distributors, please go to our website: www.avagotech.com

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.

AV02-0551EN - March 5, 2012