Datasheet

Figure 22. Tape leader and trailer dimensions.

Convective IR Reflow

Soldering

For more information on IR

reflow soldering, refer to

Application Note 1060, Surface

Mounting SMT LED Indicator

Components.

Storage Condition:

5 to 30°C @ 60% RH max.

Baking is required under the

condition:

a) Humidity Indicator Card is

>10% when read at 23 ± 5°C

b) Device exposed to factory

conditions <30°C/60% RH

more than 672 hours.

Baking recommended condition:

60 ± 5°C for 20 hours.

NOTES:

1. ALL DIMENSIONS IN MILLIMETERS (INCHES).

2. TOLERANCE IS ± 0.1 mm (± 0.004 IN.) UNLESS OTHERWISE SPECIFIED.

END START

THERE SHALL BE A

MINIMUM OF 160 mm

(6.3 INCH) OF EMPTY

COMPONENT POCKETS

SEALED WITH COVER

TAPE.

MOUNTED WITH

COMPONENTS

THERE SHALL BE A

MINIMUM OF 160 mm

(6.3 INCH) OF EMPTY

COMPONENT POCKETS

SEALED WITH COVER

TAPE.

MINIMUM OF

230 mm

(9.05 INCH)

MAY CONSIST

OF CARRIER

AND/OR

COVER TAPE.

For product information and a complete list of distributors, please go to our website: www.avagotech.com

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries.

AV02-0977EN January 10, 2008