Datasheet

7
Figure 10. Recommended wave soldering pro le
Figure 9. Recommended Pb-free re ow soldering pro le.
Note: For detailed information on re ow soldering of Avago surface mount LEDs,
refer to Avago Application Note AN 1060 Surface Mounting SMT LED Indicator Components.
217 °C
MAX. 120 SEC.
6 °C/SEC. MAX.
3 °C/SEC. MAX.
125 °C ± 25 °C
255 °C
60 to 150 SEC.
10 to 20 SEC.
TIME
TEMPERATURE
+5 °C
-0 °C
Figure 11. Recommended Pick and Place Nozzle Size for InGaN Family
Note : Diameter "ID" should
be bigger than 2.3mm
LAMINAR WAVE
BOTTOM SIDE
OF PC BOARD
HOT AIR KNIFE
TURBULENT WAVE
FLUXING
PREHEAT
01020
30
50
100
150
200
250
30 40 50
TIME – SECONDS
TEMPERATURE – C
60 70 80 90 100
TOP SIDE OF
PC BOARD
CONVEYOR SPEED = 1.83 M/MIN (6 FT/MIN)
PREHEAT SETTING = 150C (100C PCB)
SOLDER WAVE TEMPERATURE = 245C
AIR KNIFE AIR TEMPERATURE = 390C
AIR KNIFE DISTANCE = 1.91 mm (0.25 IN.)
AIR KNIFE ANGLE = 40
SOLDER: SN63; FLUX: RMA
NOTE: ALLOW FOR BOARDS TO BE SUFFICIENTLY COOLED
BEFORE EXERTING MECHANICAL FORCE.
ID