Datasheet

4
Optical Characteristics at T
A
= 25˚C
Luminous Color, Viewing Luminous
Intensity Peak Dominant Angle Ecacy
I
V
(mcd) Wavelength Wavelength 2 T
1/2
K
V
@ 20 mA
[1]
O
peak
(nm) O
d
[2]
(nm) Degrees
[3]
(lm/w)
Part Number Color Min. Typ. Typ. Typ. Typ. Typ.
HSMM-C110 Green 45 126 523 525 130 490
HSMM-C120 Green 45 120 523 525 155 490
HSMM-C170/C190/ Green 45 120 523 525 170 490
/C150
HSMN-C110 Blue 11.2 39 468 470 130 77
HSMN-C120 Blue 11.2 35 468 470 155 80
HSMN-C170/C190/ Blue 11.2 35 468 470 170 77
C191/C150
Notes:
1. The luminous intensity, I
V
, is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the lamp package.
2. The dominant wavelength, O
d
, is derived from the CIE Chromaticity Diagram and represents the perceived color of the device.
3. T
1/2
is the o-axis angle where the luminous intensity is 1/2 the peak intensity.
Color Bin Limits
[1]
Light Intensity (Iv) Bin Limits
[1]
Intensity (mcd) Intensity (mcd)
Bin ID Min. Max. Bin ID Min. Max.
A 0.11 0.18 N 28.50 45.00
B 0.18 0.29 P 45.00 71.50
C 0.29 0.45 Q 71.50 112.50
D 0.45 0.72 R 112.50 180.00
E 0.72 1.10 S 180.00 285.00
F 1.10 1.80 T 285.00 450.00
G 1.80 2.80 U 450.00 715.00
H 2.80 4.50 V 715.00 1125.00
J 4.50 7.20 W 1125.00 1800.00
K 7.20 11.20 X 1800.00 2850.00
L 11.20 18.00 Y 2850.00 4500.00
M 18.00 28.50
Note:
1. Bin categories are established for classication of products. Products may not be available in all
categories. Please contact your Avago representative for information on currently available bins.
2. The Iv binning specication set-up is for lowest allowable Iv binning only. There is no upper Iv bin
limits.
Note:
1. Bin categories are established for class-
ication of products. Products may not be
available in all categories. Please contact
your Avago representative for information
on currently available bins.
Blue Color Bins
[1]
Dom. Wavelength (nm)
Bin ID Min. Max.
A 460.0 465.0
B 465.0 470.0
C 470.0 475.0
D 475.0 480.0
Tolerance: ± 1 nm
InGaN Green
Color Bins
[1]
Dom. Wavelength (nm)
Bin ID Min. Max.
A 515.0 520.0
B 520.0 525.0
C 525.0 530.0
D 530.0 535.0
Tolerance: ± 1 nm
Tolerance: ± 15%